As of 2013, Volvo has a new OBD2 Style diagnostic connector for a Volvo chassis with a Volvo engine. Volvo still plans on keeping the standard J1939 9-pin Deutsch connector for a Volvo chassis with a Cummins engine. The new interface has two separate CAN channels with ISO15765 on CAN channel 1 and J1939 on CAN channel 2. It will also have J1708 in the connector as well.
This adapter allows the use of a standard J1939 tester to connect to the new connecter style. It hooks into the Channel 2 standard J1939. It also allows the use of a standard GPS unit or other J1939 heavy equipment accessory with the new Volvo connetor style connector.
The pinout of the new style Volvo diagnostic connector is:
| Pin Number |
Signal |
| 3 |
J1939+ |
| 5 |
GND |
| 6 |
ISO15765+ |
| 11 |
J1939- |
| 12 |
J1708+ |
| 13 |
J1708- |
| 14 |
ISO15765- |
| 16 |
BATTERY |
Wiring Connections for the adapter:
| Volvo |
Signal |
J1939 |
| 5 |
Ground |
A |
| 16 |
Battery |
B |
| 3 |
J1939-H |
C |
| 11 |
J1939-L |
D |
| 12 |
J1708+ |
F |
| 13 |
J1708- |
G |
Other similar adapters
J1939 Female to OBD2 Female
 |
This adapter mates with a J1939 vehicle and allows an OBD2 style tester connection to fit. The J1939 +/- data lines are connected to the CAN +/- lines, and the power and ground lines are also connected. The most common application is to connect a GPS Tracker that is meant for an OBD2 vehicle to a vehicle that has the 9-pin round Deutsch connector.
$42.50
 |
| | |
J1939 Male to OBD2 Male
 |
This adapter cable allows a J1939 Scan Tool (a scanner designed to plug into the round J1939 9-pin Deutch connector on a vehicle) to be used with a J1939 equipped vehicle that uses a standard OBD2 style connector.
$42.50
|
| | |
Volvo M-M Adapter
 |
Beginning in 2013, Volvo has a new OBD2 Style diagnostic connector for a Volvo chassis with a Volvo engine. This adapter allows the use of a standard J1939 tester to connect to the new connector style.
$42.50
|
| | |
GMC Top Kick M-M Adapter
 |
The GMC Top Kick with the Cummins engine uses an OBD2 style connector for diagnostics, but uses J1708 data. The Top Kick with the CAT engine uses J1939 Data. This adapter allows a J1939/J1708 tester with the standard J1939 9-pin connecter to hook to the Top Kick.
$42.50
|
| | |
Hino Truck M-M Adapter
 |
This adapter allows a J1939 tester with the standard J1939 9-pin connecter to hook to the Hino with the OBD2 style connector.
$42.50
|
| | |
Allison to J1939 Adapter
 |
Allison (and some Detroit Diesel) vehicles using the 16-pin OBD2 style diagnostic connector use pin 4 for Ground instead of pin 5. This adapter allows a standard J1939 accessory (GPS unit, tester, etc) using the 9-pin plug to connect to the Allison diagnostic port.
$42.50
|
Don't see what you need? Check out our Custom Cables page or give us a call at 310-793-2410. We can custom make nearly any configuration
to your specifications.
